Polycom KIRK 14117800, Installation And Configuration Manual

Page: 101 / 220

Configuring KIRK Wireless Server 600v3 101
KIRK Wireless Server 600v3 Installation and Configuration Guide
1
Under the Configuration menu, click ETH0 , and then click DHCP .
Figure 37
Adm. Page: Configuration/ETH0/DHCP page
2
From the Mode list, select Disabled , and then click OK .
3
Click Reset (under Administration menu) to save your configuration.
4
Under the Configuration menu, click ETH0 , and then click IP .
Note:
It is necessary to use the ETH0 port when integrating the KWS600v3 on the
local network.
Figure 38
Adm. Page: Configuration/ETH0/IP page
5
In the IP address field, type the new IP address.
The new IP address is now the default address when accessing the KWS600v3.
6
In the Network mask field, type a new network mask.
7
In the Default gateway field, type the IP address of the default gateway.
Contact your system administrator for more information.
8
Click OK .