Polycom KIRK 14117800, Installation And Configuration Manual

Page: 128 / 220

128
Configuring KIRK Wireless Server 600v3
14117800, Ed.2.6
• In the Alternative Gatekeeper field, type an alternative IP address of your call
handler (optional).
Contact your system administrator for more information.
• From the Protocol list, select either H323 , SIP or Skinny depending on the
protocol you are using.
3
In the System area:
• In the AC field, type an authentication code (optional).
• From the Subscriptions list, select either Allow Anonymous , With User AC only ,
or Disabled .
Note:
It is recommended to select With User AC only . When subscribing a new
handset to the system it is possible to use an authentication code (AC). If you
want to use the authentication code, you must select With User AC only . For
more information about subscription of handsets and authentication codes, refer
to “Subscribing Handsets” on page 152 .
• From the Coder list, select a voice compression value that matches your
telephony infrastructure.
Contact your system administrator for more information.
Note:
The voice compression value is not exclusive and the KWS600v3 is not
forced to use the coder.
• From the Tones list, select a ring tone.