Polycom KIRK 14117800, Installation And Configuration Manual

Page: 213 / 220

Regulatory Notices 213
KIRK Wireless Server 600v3 Installation and Configuration Guide
NOTICES
NOTICE: Before installing this equipment, users should ensure that it is permissible to
be connected to the facilities of the local telecommunications company. The equipment
must also be installed using an acceptable method of connection. The customer should be
aware that compliance with the above conditions may not prevent degradation of service
in some situations.
Repairs to certified equipment should be coordinated by a representative designated by
the supplier. Any repairs or alterations made by the user to this equipment, or equipment
malfunctions, may give the telecommunications company cause to request the user to
disconnect the equipment.
Users should ensure for their own protection that the electrical ground connections of the
power utility, telephone lines and internal metallic water pipe system, if present, are con-
nected together. This precaution may be particularly important in rural areas.
CAUTION: Users should not attempt to make such connections themselves, but should
contact the appropriate electric inspection authority, or electrician, as appropriate.
Note: If your telephone equipment causes harm to the telephone network, the telephone
company may ask you to disconnect the system from the line until the prob lem has been
corrected or they may discontinue your service temporarily. If possible, they will notify
you in advance, But if advance notice is not practical, you should be notified as soon as
possible. You will be informed of your right to file a complaint with the FCC.
Your telephone company may make changes in its facilities, equipment, operations, or
procedures that could affect the proper functioning of your telephone system, If they do
and it is possible, you will be notified in advance to give you an opportunity to mainta- in
uninterrupted telephone service. If you experience trouble with this telephone system,
disconnect it from the network until the problem has been corrected or until you are sure
that the equipment is not malfunctioning.
Note: This equipment has been tested and found to comply with the limits for a class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a par-
ticular installation. If this equipment does cause harmful interference to radio or televi-
sion reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the seperation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.