Polycom KIRK 14117800, Installation And Configuration Manual

Page: 113 / 220

Configuring KIRK Wireless Server 600v3 113
KIRK Wireless Server 600v3 Installation and Configuration Guide
7.6.4.4 Setting LDAP Replicators
(Secondary)
In a KWS600v3 Multi-cell solution the Secondary KWS600v3 needs access to the
information (such as system ARI code and user data) that is stored on the Master
KWS600v3/LDAP Server. Therefore, it is necessary to activate the LDAP replicator
services for the Secondary KWS600v3.
1
Under the Configuration menu, click LDAP , and then click Replicator .
Figure 54
Adm. Page: Configuration/LDAP/Replicator page
2
Select the Enable check box.
3
In the Server field, type the IP address of the Master KWS600v3 - or the LDAP Server,
if this is part of your installation.
4
In the User field, type the user name.
5
In the Password field, type the password.
Note:
The password will be verified against the Master KWS600v3.
6
Click OK .
7
Click Reset (under Administration menu) to save your configuration.