manualshive.com logo in svg

Polycom KIRK 14117800, Installation And Configuration Manual

Share
Download
Polycom KIRK 14117800 Installation And Configuration Manual Download Page 42

42

  

    Installing the KIRK Wireless Server 600v3

 

14117800, Ed.2.6 

•

“KIRK Wireless Server 600v3 LED Indicators” on page 44

•

“KIRK Wireless Server 600v3 - Reset Button” on page 45

4.2.1  KIRK Wireless Server 600v3 Provides RF Channels to KIRK Handsets

The KWS600v3 supports 12 RF channels simultaneously for DECT or USA DECT bands.

The RF communication is provided according to the band standard at the site:
• KWS600v3 provides 12 RF channels of 1.88 GHz, DECT standard, used in Europe, 

Australia and South America.

• KWS600v3 provides 12 RF channels of the 1.9 GHz, USA DECT standard, used in 

North America.

4.2.2  KIRK Wireless Server 600v3 Types and Part Numbers

The KWS600v3 contains RF circuitry that comply with the local band standards: ETSI 

DECT and USA DECT 6.0. The table below includes a list of available KWS600v3 and 

their part numbers.

Table 1   

KIRK Wireless Server 600v3 Part Numbers

Variants of KIRK Wireless Server 600v3

Part Number

KIRK Wireless Server 600v3 1.8 GHz (conforms with standard DECT 

markets)

• with Skinny Protocol
• with H.323 Protocol
• with SIP Protocol

For more information about SIP variants go to 

the support page of the KWS600v3 at 
www.polycom.com

02363300
02363301
02363301

KIRK Wireless Server 600v3 1.9 GHz (for North America)

• with H.323 Protocol
• with SIP Protocol

KIRK Wireless Server 600v3 1.9 GHz bundles (for North America)

• starter bundle - 4020 handset
• starter bundle - 4040 handset
• starter bundle - 5020 handset

02338501
02338501

02363500
02363501
02363502

4.2.3  KIRK Wireless Server 600v3 Appearance and Components

The KWS600v3 front cover includes the following:

Summary of Contents for KIRK 14117800





























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands