Polycom 1725-16829-001 Page 119 User Manual Download

Page: 119 / 158

Changing the Brightness of the Touch Screen

Customizing the Phone Display

Polycom, Inc.

113

To enable or disable the time and date display:

Tap

Settings

Basic

Preferences

Time & Date

From the Time & Date screen, do one of the following:

—

To disable the time and date display, tap

Disable

—

To enable the time and date display, tap

Enable

Tap

to return to the idle screen.

Changing the Brightness of the Touch Screen

The brightness of the touch screen has three components:

•

Backlight On

•

Backlight Idle

•

Maximum Intensity

You can modify the Backlight On intensity and the Backlight Idle intensity

separately. You can choose a high, medium, or low intensity, or turn the

backlight off entirely.
When you modify the Maximum Intensity, you modify the entire backlight

intensity scale. For example, if you decrease the Maximum Intensity, the low,

medium, and high values for the Backlight On intensity and the Backlight Idle

intensity will decrease proportionally.
The Backlight On intensity applies to following events:

•

Any key press

•

Incoming calls

•

Ending a call, holding a call, resuming a call by the other party

•

A voice message received

If you don’t press any keys on the phone, after 20 seconds of the backlight

turning on, the backlight dims (or changes) to medium in the following cases:

•

A call is in progress

•

A call is on hold

•

There is an incoming call (ringing)

•

There is an outgoing call (ringing back)

•

Any menu shows on the display

In all other cases, the Backlight Idle intensity applies.

Summary of Contents for 1725-16829-001































































































































































Search results

Summary of Contents for 1725-16829-001

Reviews:

Related manuals for 1725-16829-001

Brands by name

Popular brands

Polycom 1725-16829-001, User Manual

Search results

Summary of Contents for 1725-16829-001

Reviews:

Related manuals for 1725-16829-001

Brands by name

Popular brands