Polycom 1725-16829-001 Page 13 User Manual Download

Page: 13 / 158

What Displays on the Touch Screen?

Getting Started with Your Phone

Polycom, Inc.

Status bar
(continued)

Icons display along the far-left of the status bar. The following icons can display:

—Missed calls

—Do Not Disturb enabled

—USB flash drive attached and idle

—USB flash drive attached and playing back

—USB flash drive attached and recording

—USB flash drive attached and recording paused

—Headphones attached

—Login credentials locked

Active call window

Displays the active call. During a video call, the active call window can display
the near site or the far site.

Inactive call group

Displays calls on hold, as well as incoming calls that are not immediately
answered.

Soft keys

Keys on the touch screen that you can tap to access phone functions. The keys
are automatically labeled to identify their context-sensitive functions.

Menu key

Opens the Main Menu.

Line Keys and
Speed Dial Keys

See

Line Key

in this table.

See

Speed Dial Keys

in this table.

Speed Dial Keys

Use these keys to activate up to five speed dials that can be assigned to your
phone. Use a Speed Dial Key to quickly dial a contact.

Speed Dial Keys display

Feature

Description

Summary of Contents for 1725-16829-001































































































































































Search results

Summary of Contents for 1725-16829-001

Reviews:

Related manuals for 1725-16829-001

Brands by name

Popular brands

Polycom 1725-16829-001, User Manual

Search results

Summary of Contents for 1725-16829-001

Reviews:

Related manuals for 1725-16829-001

Brands by name

Popular brands