Polycom 1725-16829-001 User Manual Download Page 57

Page: 57 / 158

Changing the Way Calls are Answered

Using the Basic Features of Your Phone

Polycom, Inc.

To forward all calls to another party:

Do one of the following:

—

Tap

Features > Forward

—

From the idle screen, tap the

Forward

soft key.

If your phone is set up with a single line, the Forwarding Type Select

screen displays.
If your phone is set up with multiple lines, the Line Select screen displays.

Tap the line for which you want to forward calls. The Forwarding Type

Select screen displays.

From the Forwarding Type Select screen, tap the forwarding type you

want. The options are:

— Always

—To forward all incoming calls.

— No Answer

—To forward all unanswered incoming calls.

— Busy

—To forward calls that arrive when you’re already in a call.

Do one of the following:

—

If you selected

Always

, enter a number to forward all future incoming

calls to.

—

If you selected

No Answer

, do the following:

In the

Contact

field, enter a number to forward all unanswered

incoming calls to.

Tap the

Forward After Rings

field, and then enter how many

rings to wait before forwarding the call (one ring is approximately

six seconds). A value of 2 is recommended.

—

If you selected

Busy

, enter a number to forward all future incoming

calls to when you’re already in another call.

Tap the

Enable

soft key to confirm call forwarding.

If you chose to always forward calls, the Line Key displays the forwarding

icon,

, to indicate that the

Always

forwarding type is enabled. If you

enabled the Busy or No Answer forwarding type, the Line Key icon does not

change.

Note

You can also enter a URL or an IP address. For more information on using a URL or
an IP address, see

“Placing Calls”

on page 28.

Summary of Contents for 1725-16829-001































































































































































Search results

Summary of Contents for 1725-16829-001

Reviews:

Polycom 1725-16829-001, User Manual, Page: 57 / 158

Search results

Summary of Contents for 1725-16829-001

Reviews: