Polycom 1725-16829-001 Page 79 User Manual Download

Page: 79 / 158

Accessing Voice and Video Mail

Using the Basic Features of Your Phone

Polycom, Inc.

Accessing Voice and Video Mail

To access voice or video messages:

Press

, and then follow the prompts to access your message(s).

Working with Multiple and Shared Lines

Your system administrator can customize your phone so that you have more

than one Line Key. Your phone can also share a line with another phone.

Supporting Multiple Lines

Your phone can support up to six different lines. Lines are assigned to the

Line Keys on your phone. Typically, the top-most Line Key is reserved for the

principal directory number (DN) of the phone.
When the phone is idle, Line Keys can display the following icons. (For

information on icons that display when the phone has a call, see

“Phone Icons”

on page 9.)

Note

•

Voice and video mail is an optional feature that your system administrator sets
up. Your system may not support it.

•

Screen options may vary with your application. You may be able to access mail
with a single key press.

Line Key Icon

Displays for ...

Registered, private lines.

Registered, shared lines.

Summary of Contents for 1725-16829-001































































































































































Search results

Summary of Contents for 1725-16829-001

Reviews:

Related manuals for 1725-16829-001

Brands by name

Popular brands

Polycom 1725-16829-001, User Manual

Search results

Summary of Contents for 1725-16829-001

Reviews:

Related manuals for 1725-16829-001

Brands by name

Popular brands