Polaris Sportsman 570 EFI Owner'S Manual Download | Manualshive

Page: 138 / 148

background image

136

WARRANTY

EXPORTED PRODUCTS

EXCEPT WHERE SPECIFICALLY REQUIRED BY LAW, THERE IS NO
WARRANTY OR SERVICE BULLETIN COVERAGE ON THIS PRODUCT IF IT IS
SOLD OUTSIDE THE COUNTRY OF THE SELLING DEALER’S AUTHORIZED
LOCATION. This policy does not apply to products that have received authorization for
export from POLARIS. Dealers may not give authorization for export. You should
consult an authorized dealer to determine this product’s warranty or service coverage if
you have any questions. This policy does not apply to products registered to government
officials or military personnel on assignment outside the country of the selling dealer’s
authorized location. This policy does not apply to Safety Bulletins.

NOTICE

If your product is registered outside of the country where it was purchased and you have
not followed the procedure set above, your product will no longer be eligible for
warranty or service bulletin coverage of any kind, other than

safety

bulletins. Products

registered to Government officials or military personnel on assignment outside of the
country where the product was purchased will continue to be covered by the Limited
Warranty.
Please work with your dealer to resolve any warranty issues. Should your dealer require
any additional assistance, they will contact the appropriate person at POLARIS.
This warranty gives you specific legal rights, and you may also have other rights which
vary from state to state or in different countries. If any of the above terms are void
because of federal, state, local law, all other warranty terms will remain in effect.

For questions call POLARIS Customer Assistance:

United States & Canada: 1-800-POLARIS (1-800-765-2747)
French: 1-800-268-6334

«
...
136
137
138
139
140
...
»

Summary of Contents for Sportsman 570 EFI





















































































































































Reviews:

No comments

Related manuals for Sportsman 570 EFI

Brand: IDEAL INDUSTRIES Pages: 18

Brand: Taylor-Dunn Pages: 144

Brand: Arctic Cat Pages: 174

Brand: Landoll Pages: 82

ATV8E - SERVICE

Brand: Eton Pages: 34

Brand: KAYO MOTOR Pages: 96

Brand: KAYO MOTOR Pages: 96

Brand: Oldenbourg group Pages: 60

DS 450 EFI X mx

Brand: Can-Am Pages: 156

Brand: gio Pages: 78

Brand: Humbaur Pages: 26

Brand: ODES UTVS Pages: 41

Brand: Ace Sports Pages: 10

Brand: Kellfri Pages: 16

Skandic 503 1987

Brand: BOMBARDIER Pages: 44

WOLVERINE YFM350FXP

Brand: Yamaha Pages: 167

BIG BEAR 4X4 YFM40FP

Brand: Yamaha Pages: 168

500 MXU IRS 4X4 NAKED EFI

Brand: KYMCO Pages: 1

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands