Polaris 2013 RANGER RZR, Service Manual

Page: 401 / 430

10.29
ELECTRICAL
10
9924125 - 2013 RANGER RZR / RZR S / RZR 4 Service Manual
© Copyright 2012 Polaris Sales Inc.
Charging System Alternator Tests
Three tests can be performed using a multi-meter to
determine the condition of the stator (alternator).
TEST 1: Resistance Value of Each Stator Leg
1. Measure the resistance value of each of the three
stator legs: Y1 to Y2, Y1 to Y3, and Y2 to Y3. Each
test should measure:
0.11

± 15%
NOTE: If there are any significant variations in ohm
readings between the three legs it is an indication
that one of the three stator legs maybe weak or
failed.
TEST 2: Resistance Value of Each Stator Leg to
Ground
1. Measure the resistance value of each of the stator
legs to ground: Y1 to Ground, Y2 to Ground, Y3 to
Ground. Each test should measure:
Open Line (OL)
NOTE: Any measurement other than Infinity (open)
will indicate a failed or shorted stator leg.
TEST 3: Measure AC Voltage Output of Each Stator
Leg at Charging RPM
1. Set the selector dial to measure AC Voltage.
2. Start the engine and let it idle.
3. While holding the engine at a specified RPM,
separately measure the voltage across each ‘leg’ of
the stator by connecting the meter leads to the wires
leading from the alternator (Y1 to Y2, Y1 to Y3, Y2 to
Y3).
4. Refer to the following table for approximate AC
Voltage readings according to RPM. Test each leg at
the specified RPM in the table.


Example: The alternator current output reading
should be approximately
18 VAC at 1300 RPM
between each ‘leg’ .
NOTE: If one or more of the stator leg output AC
voltage varies significantly from the specified value,
the stator may need to be replaced.
Test
Connect Meter
Leads To:
Ohms Reading
Battery Charge Coil Y1 to Y2 0.11

± 15%
Battery Charge Coil Y1 to Y3 0.11

± 15%
Battery Charge Coil Y2 to Y3 0.11

± 15%
Test
Connect Meter
Leads To:
Ohms Reading
Battery Charge Coil
Y1, Y2, or Y3
to Ground
Open Line
(Infinity)
Y1
Y2
Y3
Perform tests at
Stator / Regulator connector
RPM Reading AC Voltage (VAC) Reading
1300 18 VAC ± 25 %
3000 42 VAC ± 25 %
5000 64 VAC ± 25 %