manualshive.com logo in svg

Polaris 2009 Outlaw 450 MXR, Owner'S Manual

Share
Download
Polaris 2009 Outlaw 450 MXR Owner'S Manual Download Page 193

190

Warranty

EXPORTED VEHICLES

EXCEPT WHERE SPECIFICALLY REQUIRED BY LAW, THERE IS NO WARRANTY OR SERVICE BUL-

LETIN COVERAGE ON THIS VEHICLE IF IT IS SOLD OUTSIDE THE COUNTRY OF THE SELLING 

DEALER'S AUTHORIZED LOCATION.
This policy does not apply to vehicles that have received authorization for export from Polaris Industries. Dealers 

may not give authorization for export. You should consult an authorized dealer to determine this vehicle's war-

ranty or service bulletin coverage if you have any questions.
This policy does not apply to vehicles registered to government officials or military personnel on assignment out-

side the country of the selling dealer's authorized location.
This policy does not apply to Safety Recalls.

Summary of Contents for 2009 Outlaw 450 MXR














































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands