E-7
Copyboard, main unit [1]
See “Assembly and Setup Manual” for information about the
assembly parts of the copyboard.
Printer* [1]
Please see the instruction manual of the printer for informa-
tion about the printer accessories.
Stand* [1]
* The printer and stand may be sold separately.
* Depending on the product you have purchased, the printer and
stand may be sold separately.
The package contents are as described below. Please check before use.
Package Contents
• USB cable (type B
↔
type A) [1]
[PLUS code 715255400]
This cable is for connecting the copyboard's Printer con-
nector with the exclusive printer (page E-37).
(If not using a printer, it can be
used to connect a computer. For
connection instructions, see the
separate "Software Operation
Manual".)
• AC power adapter (with power cord) [1]
This is the power adapter for supplying power to the
copyboard (See Page E-37).
(HEC-AP065-24V)
• Dedicated eraser (with 2 spare sponges) [1]
Use this to erase the drawing.
Copyboard Accessories
• Dedicated markers
(One each of black, red, blue, and
green)
Use these markers to draw on the
sheet surface.
Documents
• User’s manual [1] (this manual)
Includes information about safety precautions and the
use of the copyboard.
• Software Operation Manual ... 1
This manual includes instructions on setting the copy-
board's operating environment and transferring images
to the computer.
• CD-ROM [1]
This includes the user's manual (in PDF format) and
special software for using the copyboard (PLUS
TOOLBOX).
• Quick Guide [1 set]
The Quick Guide can be hung from a hook in a conve-
nient location close to the copyboard.
• Assembly and Setup Manual
Information covers the setup of the copyboard and the
connections with the printer.
Assembly and installation parts
• Wall mount brackets [1 set]
These fittings are used to mount the copyboard on a wall
(See the Assembly and Setup Manual.).
(The set includes four copyboard brackets and 16 M4
mounting screws.)
• Printer table [1 set]
The printer is placed on this printer table.
(The set includes one printer table, brackets for left and
right sides, 10 M3 assembly screws, 4 M4 screws, 2
printer guides, 2 cushions and Velcro 2 sets )
• AC adapter box (1 unit, with 2 masking screws)
Use this to store the AC power adapters of the copyboard
and printer. (See the Assembly and Setup Manual.)
• Cable covers specifically for the copyboard
(see the
Assembly and Setup Manual)
Model M-12S/M-125: 1 cover
Model M-12W: 2 covers
