E-10
Names of the Parts
DC input connector
Connect this with the DC plug end of the AC
power adapter. (See Page E-37.) (Only connect
the supplied AC power adapter; nothing else.)
Personal computer (PC) dedicated
USB port (Type B)
Connect this with the USB port (type A) of the
PC. (See Page E-37.)
Special software can be used to transfer image
data directly to the computer and set the
copyboard's operating environment. To use these
functions, first install the drivers and software on
the included CD-ROM onto the computer. (See
the separate software operation manual.)
Printer connector (USB port Type A)
Connect this with the USB connector of the
printer (See Page E-37).
(The printer connector is dedicated for use with a
printer; use it only with a printer.)
The connector is located on the bottom sur-
face of the main unit.
The diagram view is seen from the bottom.
Locking and unlocking the casters of the stand*
Lock the casters with the stopper after setup. To move the unit,
remove the stabilizers and release the caster stopper.
Press the bottom of the stopper to lock it. Press the top to
release it.
Unlock
Lock
Stabilizer Caster
Rear
* This illustration does not show the printer or connec-
tion cords.
