CIP Training
Plockmatic LCT3500 Large Capacity Tray
Clearing Misfeeds
Misfeed / Jam in Vacuum Trays when feeding thick media
55
Locate the separation pads [B] (2x) and the vacuum belts [C];
66
The separation pads are factory adjusted so that the distance between the top edge of
the separation pads and the vacuum belts is equal to 1 mm. If feeding thick media
(thicker than 350 gsm), this distance can be increased to avoid jams or misfeeds;
77
Loosen the screws [A] (2x) to move the separation pads [B] (2x) slightly downwards then
tighten the screws [A] again. Run the job again and, if necessary, move the pads
downwards again;
88
Once done with the job, reset the pads to their default distance as shown in the
pictures below (1 mm from vacuum belts and top of the separation pads).
View from inside the tray
B
B
C
A
Separation pad and vacuum belt default adjustment
1 mm
Vacuum belt
Separation pad
