CIP Training
Plockmatic LCT3500 Large Capacity Tray
Troubleshooting - Fault codes
When there is a misfeed or fault condition in the LCT, a message and fault code will be
displayed on the UI. Some fault codes may be rectified by the operator, but some fault
codes may only be rectified by an authorized technician.
To address fault codes other than those specified below, remove any paper in the paper
path and power off and on the system. If the fault code persists, contact an authorized
technician.
List of fault codes that can be rectified by the operator
General
Fault Code
Description
LCT-100/LCT-200
“Misfeed - Trays 3/4”
LCT-101/LCT-201
“Jam - Trays 3/4”
LCT-102/LCT-202
“Too Long - Trays 3/4”
LCT-103/LCT-203
“Too Short - Trays 3/4”
LCT-104/LCT-204
“Too Thick - Trays 3/4”
LCT-105/LCT-205
“DSD Functionality Uncertain - Trays 3/4”
LCT-106/LCT-206
“Too Thick US DSD - Trays 3/4”
LCT-107/LCT-207
“Tray Empty - Trays 3/4”
LCT-108/LCT-208
“Too Thin - Trays 3/4”
LCT-109/LCT-209
“Please Set Side Guides in Process Position - Trays 3/4”
LCT-110/LCT-210
“Overloaded - Trays 3/4”
LSM-300
"Misfeed, Tray A (LSM)"
LSM-301
“Jam, Tray A (LSM)”
LSM-302
“Too long, Tray A (LSM)”
LSM-303
“Too short, Tray A (LSM)”
LSM-304
"Too thick, Tray A (LSM)”
LSM-305
"DSD Functionality Uncertain, Tray A (LSM)”
LSM-306
"Too Thick US DSD, Tray A (LSM)”
LSM-307
"Tray empty, Tray A (LSM)"
LSM-308
"Too thin, Tray A (LSM)"
LSM-309
"Tray not in process position, Tray A (LSM)"
LSM-401
"Jam in LSM paper path"
LSM-450
"Clear paper area - LSM"
LSM-460
"Paper flow error Q521 - paper path LSM"
LSM-461
"Paper flow error Q522 - paper path LSM"
LCT-501
"Jam in LCT paper path"
LCT-550
"Clean paper path LCT"
