CIP Training
Plockmatic LCT3500 Large Capacity Tray
Maintaining Your Machines
Never
attempt any maintenance function that is not specifically described in this documentation.
Cleaning
Maintenance
An increasing number of misfeeds may indicate a need to clean the LCT. Clean every 50 000
cycles or when the number of misfeeds increases. Use a vacuum cleaner, towels and brushes
for general purpose cleaning of the paper path, trays, etc. In addition, follow the detailed
cleaning instructions below:
1. Remove dust from the double sheet detector sensors with a dry, soft cloth.
2. Clean the suction belts with rubber reactivator alcohol.
3. Check the separator pads for wear, tear and position (refer to "Misfeed / Jam in
Vacuum Trays when feeding thick media" in section 5 of this manual for how to
measure the default position). Replace if worn (rounded edges/warped) or if broken.