CIP Training
Plockmatic LCT3500 Large Capacity Tray
Setting Up a Job
Media and Settings Sub-Menus
This section describes how to adjust the LCT performance parameters within the LCT UI. Note
that the jobs will be programmed using the user interface of the downstream device. It is
extremely important to program the sheets size/type both in the LCT and on the printer:
there is no communication among the printer and the LCT about paper properties.
Plockmatic always recommends to use all auto/default settings.
The main menu on the User Interface
will show a summary of the main info
for each of the three trays.
The summaries will show the amount of
paper in the trays in percentage form,
the type of paper and its orientation,
the loaded job (on the top right corner)
and if the tray is running in auto
settings or not (see "status icons" in this
manual for further
information).
Start setting the LCT by pressing the
[Media] icon on the top ribbon.
The media types fed by both trays and
by the optional Long Sheet Module's
tray (Tray A) are set independently.
Choose the Tray to set [Tray A/3/4] then
follow the procedures on the next page.
Selecting the Tray
Media