Replacement
Adjustment
20 September 2006, Rev 0.01
3-75
SOLENOIDS
3.7.3 SOL4 STOP GATE SOLENOID
Removal
1. Remove Front and Rear cover (
3.3.1, 3.3.2 ).
2. Remove paper path (
3.3.6).
3. Go to service mode and choose motors.
4. Run motor M6 for access of four screws [A].
5. Disconnect connectors [B] (
x2 ).
6. Remove the screws [A] and remove the solenoid [C] ( x4 ).
Installation/Adjustment
1. Reverse the removal procedure.
2. Connect the orange wire to the orange marking on solenoid.
3. Adjust solenoid according to (
3.4.5).
[A]
[B]
[C]
