Replacement
Adjustment
20 September 2006, Rev 0.01
3-15
ASSEMBLIES
3.4.5 IDLER ARM STAPLER AREA
Adjustment
1. Remove infeed idler arm (
3.4.4 ).
2. Check that the upper idler roller [A] is 4±0,5 mm above the paper path.
3. If not, adjust distance by forming (lifting or pushing) the idler arm [B].
4. Enter service mode SOL4.
5. Check that both O-rings [C] touches the idler roller [A].
6. If not, loosen the screws [D] and adjust idler roller [A] to be parallel with O-
rings [C] ( x2 ).
7. Check that idler arm [B] is lifted 0,5-1 mm when SOL4 is activated.
8. If not, adjust idler arm [B] by loosening screw [E] ( x1 ).
[A]
[B]
[C]
[D]
[E]
