Replacement
Adjustment
20 September 2006, Rev 0.01
Replacement
Adjustment
3-67
MOTORS
3.6.9 FOLD ROLLER MOTOR M9
Removal
1. Remove the Left cover (Front cover (
3.3.1 ) or Rear cover (
3.3.2 )
depending on model).
2. Disconnect motor (
x2 ). Connector not visible in picture.
3. Disconnect connector [A] (
x1 ).
4. Remove screw [B] to remove tacho disc.
5. Unhook spring [C].
6. Remove screws [D] ( x3 ).
7. Lift out motor.
Installation
1. Reverse the removal procedure.
2. Check that chain is tensioned by spring. Chain should not be slack.
[C]
[B]
[A]
[D]
[D]
