Replacement
Adjustment
20 September 2006, Rev 0.01
3-23
ASSEMBLIES
3.4.10 CLINCHER TIMING
Removal
1. Remove in-feed cover (
3.3.3 ).
Installation
1. Reverse the removal procedure
Adjustment
1. Position the roller bearing [A] on the clincher drive bar on top of the clincher
cam lobe [B].
2. Make sure that the crank [C] and link arm is [D] is positioned as shown in fig
-
ure on both sides.
3. Adjust angle of crank [C] if necessary by loosing screw [E].
[A]
[B]
[D]
[C]
[E ]
