PCL
Pleiger Elektronik GmbH & Co. KG
www.pleigerelektronik.de
Fon +49 2324 398 333
59
/
65
Pleiger Control Loop
Manual version 2018-03
Pressing the first button will change into the “brightness configuration” picture:
Figure 10-44: brightness configuration page
Here you can set the brightness for the display and save it for further use. It can’t be set to a non
usable value. You can do it as it’s affordable to the ambient light. You don’t need a permission to do
this.
The commissioning personal can get the permission for commissioning.
If the PLD is used on the bridge you can also set the brightness for the night.
Figure 10-45: brightness configuration page in case of installation on navigation bridge
