PCL
Pleiger Elektronik GmbH & Co. KG
www.pleigerelektronik.de
Fon +49 2324 398 333
51
/
65
Pleiger Control Loop
Manual version 2018-03
10.4.3 Symbol explanation for the PCL-buses
At least one node is not reachable.
At least one power loop is faulty.
The busmaster disconnects the data loops if
it doesn’t
get commands for the nodes. No command is available
neither from the SCADA system nor via CAN bus.
Table 10-4: Symbolization of the PCL-bus state
These informations are shown for both busmaster individually in the busmaster picture.
The data loops with their device identifiers are shown. In this example all 8 loops are configured.
Each device identifier correlates to a serial interface in the busmaster (see Table 9-1 and Figure 9-3).
