PCL
Pleiger Elektronik GmbH & Co. KG
www.pleigerelektronik.de
Fon +49 2324 398 333
39
/
65
Pleiger Control Loop
Manual version 2018-03
The list of the nodes is shown after selection of the data loop (example DL3).
Figure 10-20: Data loop page (example DL3)
The list is sorted according to the wiring order of the nodes within the data loops.
The background of the node name is colored belonging to the power loops. The number of the power
loop belonging to the color is described at the bottom of the picture. The number 0 indicates that there
is no power loop used.
There is space for 48 nodes in the picture. The button
Next
is available if a data loop has more than 48
nodes. Further 16 nodes instead of the first 16 nodes where shown after a selection of the
Next
button
has accord. In this case there is also a
Prev
button available.
So it is possible to scroll with 16 nodes through the data loop.
On the left side of the node name is a field with
the node number
, it could be highlighted “orange”
if the node is in local mode.
Figure 10-21: Data loop page (following page)
