Planet NAS-5400 User Manual Download Page 93

Page: 93 / 152

The system administrator has the option to restore factory defaults for all settings, or remove all
user settings in the system. Four options are available:

1. Restore Server Configuration (basic, code page, notification).

Remove shared folders, and files in home folders.

Remove all users, groups, shared folders, users' home folders, and their files.

Remove data on the server, including all above.

Note:

1. Be careful when using the options on this page. All selected settings will be replaced by

defaults or deleted.

2. If you choose to apply the first (Restore Server Configuration) or the fourth (Remove server)

option, you must go through

“

Quick Configuration

”

again.

4.6.5 Shutdown/ Restart

Summary of Contents for NAS-5400

























































































































































Search results

Summary of Contents for NAS-5400

Reviews:

Related manuals for NAS-5400

Brands by name

Popular brands

Planet NAS-5400, User Manual

Search results

Summary of Contents for NAS-5400

Reviews:

Related manuals for NAS-5400

Brands by name

Popular brands