Planet NAS-5400 User Manual Download Page 34

Page: 34 / 152

System administrator can change the server name here and further configure the network settings.

Please note that the server name must be unique, meaning that no other server in the network

should have the same name. The name is not case-sensitive and cannot exceed 15 characters.

The first character must be a letter; the other characters can be letters, numbers, the underscore

or minus sign.

This system supports up to four domain names and three DNS servers. The length of the domain

name cannot exceed 64 characters. If the existing DHCP server has already created multiple

domain names and DNS server setup while NAS server obtains its network settings from DHCP

server, this page will capture the first item from the DHCP server. The system administrator must

specify other items manually.

LAN Port 1 tab

Summary of Contents for NAS-5400

























































































































































Search results

Summary of Contents for NAS-5400

Reviews:

Related manuals for NAS-5400

Brands by name

Popular brands

Planet NAS-5400, User Manual

Search results

Summary of Contents for NAS-5400

Reviews:

Related manuals for NAS-5400

Brands by name

Popular brands