Pixsys ATR 621 series, User Manual

Page: 43 / 100

ATR 621 - User manual 43
73

Cooling Fluid
Defi nes cooling fl uid type.

> Default


74

Proportional Band Multiplier
1.00…5.00 . > Default : 1.00.
75

Overlap/Dead Band
-20.0%…50.0% . > Default : 0.0%.
76

Cooling Cycle Time
1…300 seconds. > Default : 10s.
77

Remote Setpoint
Selects remote setpoint mode, through serial communication.

(Disabled). Controller operates autonomously. > Default .

(Slave). Controller is a slave normally in STOP: goes in RUN when,
on master device connected to the serial, a cycle is started.

(Master). Controller transmits the setpoint to all controllers
connected to the serial and set as slave.
78 bd.rt. Baud Rate
Selects baud rate for serial communication.

4800 bit/s

9600 bit/s

38400 bit/s

19200 bit/s > Default

57600 bit/s

28800 bit/s

115200 bit/s
79

Serial Parameters Setting
Selects data format for serial communication.

8 data bits, no parity, 1 stop bit. > Default .

8 data bits, odd parity, 1 stop bit.

8 data bits, even parity, 1 stop bit.
80

Slave Address
Selects slave address for serial communication.
1…254 Address for slave functioning. > Default : 254.