Pixsys ATR 621 series, User Manual

Page: 32 / 100

32 ATR 621 - User manual
Press Display Do
4

+
Flashing digit of green display
changes.
Enter password

.
5
OK
Green display shows the fi rst
parameter while red display
shows the value.
6
Allows to switch from mne-
monic to numeric parameter
visualization (and vice versa).
7 Scroll parameters.
Viualize parameter to be
modify.
8
OK
Allows parameter modifi -
cation: on red display the
chosen parameter value starts
fl ashing.
9
Increase or decrease visuali-
zed value.
Enter new data.
10
OK
Confi rms data entering (red
display stops fl ashing). To modify a new parameter
back to point 7.
11
START
STOP
Confi guration ends. Controller is in

.
NB : If a memory card is introduced, in a few minutes it will be
updated according to the modifi cations done.
11
Table of confi guration parameters
1

Command Output
Command output type selection.

> Default (Default parameter).




