PiXORD P-465 User Manual Download

Page: 23 / 104

RS-485 Connection Between Fast Dome and Conversion Interface

TXD+ of conversion interface RS-485 jack connects to TXDI+ of 1

fast dome and connect TXD- to

TXDI-

Linking 2

Fast Dome

TXDO+ of 1

dome RS-485 jack connects to TXDI+ of 2

dome to TXDO- of 1

dome to TXDI- of 2

dome. 64 fast domes can link through the connection as shown.

7.4 Fast Dome, DVR and Keyboard

The DVR System is an advanced digital recording product, with long recording time and easy searching

features. Telemetry remote control is twisted pair for data transmission to the fast dome. Fast dome can

be controlled directly from the control panel of the DVR or from keyboard.

Each DVR (Digital Video Recorder) can manage 16 video signals and via RS-485 to daisy connection 16

sets of fast dome camera.

RS-485 Connection Between Fast Dome and DVR

TXD+ of DVR RS-485 jack connects to TXDI+ of 1

fast dome and TXD- of DVR to TXDI- of the 1

fast

dome.

Linking 2

Fast Dome

TXDO+ of 1

dome RS-485 jack connects to TXDI+ of 2

dome to TXDO- of 1

dome to TXDI- of 2

dome.

RJ-45 Connection Between DVRs

“Keyboard Out” of 1

DVR pass out RJ-45 jack connects to “Keyboard In” of 2

DVR’s RJ-45 jack.

RJ-45 Connection Between DVR and Keyboard

“Keyboard In” of 1

DVR’s RJ-45 jack connects to RJ-45 jack of keyboard.

Summary of Contents for P-465









































































































Search results

Summary of Contents for P-465

Reviews:

Related manuals for P-465

Brands by name

Popular brands

PiXORD P-465, User Manual

Search results

Summary of Contents for P-465

Reviews:

Related manuals for P-465

Brands by name

Popular brands