PiXORD P-465, User Manual

Page: 44 / 104

Preset Point Setting
There are 128 individual preset points. Each preset stores the exact position of the camera and
automatic pan, tilt, zoom, focus and iris setting. Once the data is set, the preset can be recalled for
viewing, or the presets can be set for auto pan.
Note: Only the first 16 preset points of the device can be set to auto pan mode and first 6 preset points
are corresponding with the 6 alarm inputs.
Selecting Preset Point
Click on the arrow button and select the desired number
from the pull-down list.
Setting Preset Dwell Time
Click on the arrow button and select the desired value from
the pull-down list.
Setting Preset Speed
Click on the arrow button and select the desired value from
the pull-down list.
Save / Remove Preset Data
Click on [Save] button will save the current data as a
preset point.
Click on [Remove] button will erase all 128 preset points.
Selecting Preset Group for Auto Pan
Select the groups by clicking on the check boxes, then click
[Submit] button to save the changes made.
Activate / Stop Auto Pan
Activate: Click the arrow button.
Stop: Click the rectangle button.
Setting Preset Point
Select a preset point. (If this point has been set previously, the following procedure will change the
previous settings after saving)
Move the camera to the desired view position. (Refer to the previous page)
Adjust the zoom, focus and iris of lens. When set up preset point, using manual focus will provide
both clarity and stability of image. (Refer to the previous page)
Set preset Dwell time. The dwell time means the time user wants to view on certain preset point
under Auto Pan. The Dwell time can be set between 1 ~ 255 seconds.
44