PiXORD P-465, User Manual

Page: 8 / 104

3. Warning & Cautions
Please read the manual before attempting installation or operation
1. Please be aware to the warnings and cautions notice.
2. Don’t use any chemical detergent to clean the machine surfaces, use a damp cotton cloth only.
Regularly clean the dome cover to assure proper focus ability.
3. Please install the fast dome in a dry area, water and high humidity may cause damage internal parts.
External housing should be used for outdoor installation.
4. Please use parts supplied by the manufacturer only, any unqualified part used in the equipment may
violet the warranty.
5. Avoid installing the equipment in an unstable area. Make sure the area is firm and stable. Falling
equipment may injure personnel and damage the equipment.
6. Do not install the equipment near any flammable gas. Violation may cause fire or injury.
7. Avoid running video cable and signal cable through or passing interference sources such as video
waves, broadcast station, power generator, elevator motor or high voltage area etc. Violation may
cause interference.
8. Make sure the power cable is properly fixed. Un-suitably fixed cable may cause serious short circuit
or fire.
9. Correct cable connection is important. Do not place any object on the connection cable and change
the cable if there is damage on cable. Violation may cause short circuit, fire and injury.
10. Make sure ground is well connected to avoid damage caused by lightning.
11. Do not put any foreign objects inside the equipment and do not spray any liquid on equipment. This
will avoid short circuit damage.
12. Do not touch power connection with wet hands to avoid short circuit or electricity shock.
13. Do not apply smash- force on the equipment. Violation may cause damage.
14. Do not install the equipment in a location that may expose the equipment to sunlight. Violation may
cause color fading or damage.
15. Do not install the equipment in high temperature or low temperature environment to avoid damage.
The normal operational temperature is between -10
℃
~ +50
℃
.
16. fast dome contains high sensitive electric parts inside. Do not try to repair them without qualifies
personnel.
17. Turn off the power immediately and contact the technician when the following occurs:
Damage on power cable or plug
Water leaks into the equipment
Fast dome can not be operated normally
Equipment falling on ground or damage on external cause
8