PiXORD P-465, User Manual

Page: 29 / 104

10.2 Video Channel Selection
The Video Channel allows the users to choose viewing 1
channel at a time or 4 channels at the same time.
CH1 displays the video stream of the camera.
CH2~4 display the video stream of the IP Camera or Video
Server that connected the device via network.
Select “All” to display the local video stream (Channel 1)
as well as 3 external video sources (Channel 2 ~4).
Select 1~4 to display the video stream of single channel.
Select Actual to display the video stream at the actual
resolution
10.3 Pan / Tilt / Zoom Control
The PTZ control panel allows the users to pan, tilt and zoom the dome.
Speed: Click on the arrow button and select the speed of the Pan and Tilt movements. Values run
from 1 to 7. Being 1 the slowest and 7 the fastest.
Preset Point: Click on the arrow button and select the preset point from the pull-down list for quick
view.
Manual Pan/Tilt: Click on the 8-directions button to move the camera to that direction. Click on the
rectangle button to stop the movement.
180
o
button: The viewing will turn 180 degrees.
Zoom -: Click on this button for Zooming Out.
Zoom +: Click on this button for Zooming In.
Iris +: Opens the iris and brightens the picture.
Iris -: Opens the iris and reduces glare.
Focus +: The target will become nearer.
Focus -: The target will become farther.
Auto Iris: The lens will automatically adjust itself for
optimum iris.
Auto Focus: The lens will automatically adjust itself for optimum focus.
Auto Pan: Click on the arrow button to activate; click on the rectangle button to stop. When the
Auto Pan function is activated, the camera will auto touring the preset groups entered. Only the first
16 preset points of the camera can be set to auto pan mode and first 6 preset points are
corresponding with the 6 alarm.
29