PiXORD P-465, User Manual

Page: 78 / 104

6. Synchronization Mode Setting
Push joystick down to select <SYNC MODE> and then push joystick left or right to
select mode.
INT: Use synchronization signal of internal camera.
LL: Synchronize synchronization signal of camera and AC signal of external power.
Select <LL> and press key into LL setup and then push joystick left or
right to adjust LL phase. (0~100, each step is 3.5
°
, phase adjustment is 0
°
~350
°
)
7. Auto Gain Control Setting
Push joystick down to select <AGC LIMIT> and then push joystick left or right to make
selection. Auto Gain Control range is 0db~3db.
3. Image Setting
After getting in advanced setting menu, push joystick down to select <IMAGE> and then
press key into image setting menu.
1. Gamma Setting
Push joystick down select <GAMMA> and then push joystick left or right to make
selection (00~07)
2. Pedestal Setting
Push joystick down to select <PEDESTAL> and then push joystick left or right to make
selection (00~15)
78