PiXORD 261 series, User Manual

Page: 68 / 83

Setting Preset Group
The purpose of setting preset group allows the management of the 16 preset positions before auto scanning. The
first 16 preset positions of each dome are separated in 4 groups.
Preset Group must be set for the auto pan reference.
Group 1 includes: 1st 2
nd
3
rd
and 4
th
preset positions.
Group 2 includes: 5th 6
th
7
th
and 8
th
preset positions.
Group 3 includes: 9th 10
th
11
th
and 12
th
preset positions.
Group 4 includes: 13th 14
th
15
th
and 16
th
preset positions.
To set up group 1: Push key 1 followed by F 4 key.
Ex. PIH-800II PIH-801
To set Group 1 1 F 4 1 F 4
To set Group 2,3 1 2 F 4 2 3 F 4
To set Group 3,4 3 4 F 4 3 4 F 4
To set Group 1,2,3 1 2 3 F 4 1 2 3 F 4
To set Group 2,3,4 2 3 4 F 4 2 3 4 F 4
To set Group 1,2,3,4 1 2 3 4 F 4 9 9 9 F 4
Changing Preset Data
In order to change any preset position from the one stored, the dome must first be sent to that preset position.
To change the 4
th
preset position of the Dome number 3, perform the following steps:
Push 3 CAM to select Dome 3
Push 4 PRESET to go to 4
th
preset position
Move joystick to bring camera to the desired view position.
Adjusting lens
Setting preset speed
Setting dwell time
Store Data
(Please refer to page 32 for step)
68