PiXORD 261 series, User Manual

Page: 52 / 83

up some items. And, it will generate and append new script code to edit window. The other one is to edit the form
manually, which is for experienced users that want to deeply control the functionalities of event operation. Please
refer to “ Event Script Programmers Guide ” which could download from http://www.pixord.com for detail syntax
and options description.
Event Script Edit : Text window to enter event script manually.
Event Status : Indicate the event status, “Stop Now” or “Start Now”.
Message : A window to show the results when below command icon pressed --- normally will show “OK”,
“Parsing”, “Fail”, Or “Err String” which indicates the syntax error of parsing, and starts from the error position in
the script.
Save Script : Command to save and parse current scripts in the “Event Script Edit” window. If any syntax
errors are detected, the error message, indicating the starting position of syntax error, will be shown in the
“Message” window.
Event Auto Start when Power On : The flag is to set the event script auto start-up when the system is
powered on.
Note: Any changes in “ Event Script Edit ” window must “ Save Script ” before “ Start Script ”;
otherwise, the new changes will be lost and won’t take effective. Also the changes won’t be saved
into permanent memory unless you click the “Save Changes” button in main Administration panel.
Clear : Command to clean up “Event Script Edit” window.
Start Script : Command to start the script execution.
Stop Script : Command to stop the script execution.
Script Wizard : Command to start the script wizard. It helps user to make simple script automatically by
wizard, but the wizard supports only partial trigger and action commands. To fully leverage the complete
functionalities of event script, please refer to “Event Script Programmers Guide”.
Set Motion Detection Area : In order to activate the motion detection, you must choose the detection area
and start the motion detection script manually or by wizard.
52