PiXORD 261 series, User Manual

Page: 2 / 83

WARNINGS & CAUTIONS
Please read the manual before attempting installation or operation
Please be aware to the warnings and cautions notice.
1. Don’t use any chemical detergent to clean the machine surface, use a damp cotton cloth only. Regularly clean the
dome cover to assure proper focus ability.
2. Please install the PIXORD NDC in a dry area, water and high humidity may cause damage on internal parts. External
housing should be used for outdoor installation.
3. Please use parts supplied by the manufacturer only, any unqualified part using in the equipment may violate the
warranty.
4. Avoid installing the equipment in an unstable area. Make sure the area is firm and stable. Falling equipment may
injure personnel and damage the equipment.
5. Do not install the equipment near any flammable gas. Violation may cause fire or injury.
6. Avoid running video cable and signal cable through or passing interference sources such as video waves, broadcast
station, power generator, elevator motor or high voltage area … etc. Violation may cause interference.
7. Make sure the power cable is properly fixed. Un-suitably fixed cable may cause serious short circuit or fire.
8. Correct cable connection is important. Do not place any object on the connection cable and change the cable if there
is damage on cable. Violation may cause short circuit, fire and injury.
9. Make sure ground is well connected to avoid damage caused by lightning.
10. Do not put any foreign objects inside the equipment and do not spray any liquid on equipment. This will avoid short
circuit damage.
11. Do not touch power connection with wet hands to avoid short circuit or electricity shock.
12. Do not apply smash-force on the equipment. Violation may cause damage.
13. Do not install the equipment in a location that may expose the equipment directly to sunlight. Violation may cause
color fading or damage.
14. Do not install the equipment in high temperature or low temperature environment to avoid damage. The normal
operational temperature is between –5
℃
~ +50
℃
.
15. PIXORD NDC contains high sensitive electric parts inside. Do not try to repair them without qualified personnel.
16. Turn off the power immediately and contact the technician when the following occurs:
A. Damage on power cable or plug.
B. Water leak into the equipment.
C. PIXORD NDC cannot be operated normally.
D. Equipment falling on ground or damage on external case.
E. Unusual occurrence.
17. Warning: Do not try to repair the equipment. Only a qualified technician may disassemble and repair the equipment.
Shut off the power before disassemble the equipment and don’t put power on unless the case is completely assembled.
2