PIXELHUE Flex-View F4, User Manual

Page: 97 / 146

Flex-View Event Presentation Switching Solution
User Manual
7 Event Management Software Triton
www.pixelhue.com 92
Type Parameter Description
is normal.
Select
Enable to enable the test pattern function first.

Grid: Indicates the width of gradient color or the space
between test lines. This parameter is available when
the test pattern is not a pure color.

Speed: Indicates the moving speed of the test lines.
This parameter is available when the test pattern is
lines.

Brightness: Indicates the brightness of the test pattern
displayed on the LED screen.
Color Contrast The value ranges from 0 to 100, and defaults to 50 .
Brightness The value ranges from 0 to 100, and defaults to 50 .
Gamma The value ranges from 0.25 to 4.00, and defaults to 1.00 .
Hue The value ranges from –180 to +180, and defaults to 0 .
Saturation The value ranges from 0 to 100, and defaults to 50 .
Reset Click Reset to reset the value to default.
Output AOI Settings A box that can be positioned and sized freely within the
active output area makes the AOI area a new active area.
This box is highlighted in orange and helps you to adjust
the AOI within the active output area.

Diagram: An orange box indicates the AOI active area.

X: Adjust the horizontal initial position of the AOI active
area.

Y: Adjust the vertical initial position of the AOI active
area.

Width: Adjust the width of the AOI active area.

Height: Adjust the height of the AOI active area.
Click Apply to make the settings take effect, and click
Reset to reset the AOI to default which is the full active
output area.
Advanced Output
Position Position the mosaic area.

Initial X: Set the horizontal initial position for the
selected mosaic area.

Initial Y: Set the vertical initial position for the selected
mosaic area.
Blending

Edge: Select a desired edge for blending.

Feathering: Enable the feathering function.

Gamma: Set the Gamma value for feathering.

Width: Set the feathering edge width.
Click Reset to reset the value to default.
Virtual Pixels

Configured Screen Size: Set the configured screen size.

Actual Screen Size: Set the actual screen size.
Click Apply to make the settings take effect.