Flex-View Event Presentation Switching Solution
User Manual
7 Event Management Software Triton
www.pixelhue.com
78
Removing Devices
Go to
Programming
>
Device
to enter the
Device
page.
Click the
×
icon on top right of the device you want to remove.
Removing devices
In the displayed dialog box, click
Yes
to remove the device.
7.2.3.2 Input
Go to
Programming
>
Input
to enter the
Input
page. The system will automatically
detect all the input connectors and add them to the
Input
page.
After a device is added, the system will automatically identify the input and output
cards as well as their connectors on the device backplane. In addition, the system
will automatically set each input connector as an input.
Input
In the left green box,
Input source image: If an image is displayed, the signal is accessed normally.
Black: No signal is accessed or the accessed signal is abnormal.
Single Link DVI-D
: Indicates the input connector type.
Input 1-1
: Indicates the input name which can be changed on the properties
panel.
1920×1080@60Hz
: Indicates the resolution of current input source. If the input
source is an interlaced signal, a letter "i" is shown in the resolution, for example
1920×1080i@60Hz.
In1-1
: The first 1 indicates the input card No. and the second 1 indicates the
connector No. on the input card.
Input Settings
Click
on the bottom right of the
Input
page or double click an input to open the
input settings window. The input properties include general, EDID, color and DSK
settings.
