Flex-View Event Presentation Switching Solution
User Manual
7 Event Management Software Triton
www.pixelhue.com
97
: Zoom out the PVW and PGM areas at the same time.
Select All
: Click to select all the PVW layers and click again to cancel selection.
: Delete the selected layer. If you have clicked
Select All
, click this button to
delete all PVW layers.
: Delete all the layers in PVW area.
: Reset the size and position of the selected layer in PVW area to default
values. The default layer size is half of the input resolution width and height. The
default layer position is (0, 0).
Transition Effect Settings
Perform the transition related settings.
Transition setting zone
: Set the PVW and PGM switching mode.
−
: Swap function is enabled, and the PVW and PGM displays are
swapped.
−
: Swap function is disabled, and the PVW and PGM display the same
content.
: Select a transition effect. The transition effect defaults to
Fade
. A total of
13 effects are supported.
: Set the transition effect duration by entering numbers directly or clicking
+
/
-
. The duration ranges from 0.1s to 10s.
: Send the layers in PVW to PGM instantly without any transition effect.
: Send the layers in PVW to PGM with a selected transition effect within a
specified time.
: Show the virtual T-Bar. Click and drag the T-Bar to manually send the
layers in PVW to PGM with a selected transition effect.
