Flex-View Event Presentation Switching Solution
User Manual
7 Event Management Software Triton
www.pixelhue.com
76
All the switchers can be added into Triton. You can select any device listed in the
drop-down list.
Enter the device IP address.
The IP address is the unique identifier of a device and must not conflict with the IP
addresses of other devices.
Click the
+
button and add the input and output cards to the slots according to the
types of the cards on the device backplane.
Adding cards
Click
OK
to finish adding an offline device.
Changing Card Type
For an offline device, you can change the card type or delete the added cards. If the
card is being used, you cannot change its type or delete it.
After you click the
Edit
button in the device diagram area, the cards on the backplane
are activated, and you can change or delete them.
Changing card type: Click the
+
button under the target card to select a desired
card type. The target card will be changed to the selected card and the
corresponding connector icons will appear on the backplane.
Deleting a card: Click the
+
button and select
None
to delete the target card.
Configuring Device Properties
After a device is successfully added, click
to change the basic device
properties and network settings. Those properties and settings are described in
