Flex-View Event Presentation Switching Solution
User Manual
8 U3 Event Controller
www.pixelhue.com
128
8.6.5.3 How to switch the layer input source?
The U3 provides 16 input buttons and supports at most 32 input sources under full
load.
The input buttons allow you to add or switch an input source for the selected layer.
Adding input source
After a layer is added, the first available input source is added automatically for
the layer.
Switching input source
If you want to switch the input source for the selected layer, press a target layer
button, and then press a desired input source button.
8.6.6 How to save and load presets?
Saving presets
1.
Press the
SAVE
button in the
PRESET EDIT
area to activate the preset saving
function, and then the button starts to flash (yellow).
2.
Press a preset button in the
PRESET
area to save the current layer layout and
settings as a preset. The preset button turns yellow after saved successfully.
Loading presets
1.
Press a preset button (yellow) in the
PRESET
area to load the selected preset
to PVW.
2.
Press the
CUT
or
TAKE
button, or push the T-bar to send the PVW to PGM.
