Flex-View Event Presentation Switching Solution
User Manual
7 Event Management Software Triton
www.pixelhue.com
80
Parameter
Description
SMPTE Reduced Range
Bit Depth
The bit depth of the input source
It is automatically identified.
The options include:
12-bit
10-bit
8-bit
Crop
Select
Enable
to enable the input cropping function.
X: The horizontal initial position of the cropped part
Y: The vertical initial position of the cropped part
Width: The width of the cropped part
Height: The height of the cropped part
You can click
next to
Width
and
Height
to lock the aspect
ratio. After locked, only the width can be adjusted, and the
height will be calculated and adjusted automatically.
EDID
View and set the resolution of current input, including the standard resolution,
custom resolution and advanced EDID settings. For details about the parameters
and settings, see
Table 7-4
EDID
Parameter
Description
Standard
The commonly-used resolutions and frame rates for the selected
connector are listed. Select a desired resolution and frame rate.
Custom
Customize the width, height, and frame rate for the input
connector.
Width: The width of the input source image
Height: The height of the input source image
Click the box next to
Frame Rate
to select a frame rate for the
input source from the window that appears.
After the settings, click
Apply
to make the settings take effect.
Advanced
Check the box next to
Advanced
to enable the advanced EDID
settings. The parameters of the advanced settings are as follows.
