2 • Printer Basics
2-12
SV61665 Rev. C
8. Adjusting the Exit Rollers
Adjust the exit rollers so they overlap the left and right edges of
the material by 1/4" (6mm). Rotate the release lever to vertical
then slide the rollers from side to side to make the adjustment
and press the lever down to lock. Must be down and latched to
operate.
IMPORTANT:
Make sure the rollers do not touch any printed
area of the material. If this happens, the rollers will act like a
printing press and imprint a faint impression at incremental
distances on the material. If this happens, move the roller or
rollers toward the nearest clear zone, that is, an area free of
printing.
Output Stack Height
The output stacker holds up to five inches of material before
it becomes necessary to remove the stack from the bin. The
optional power stacker increases capacity to 300 #10 or DL
envelopes.
NOTE:
As the stack approaches the 5" (130mm) limit, there is
a potential for stacking misfeed (pieces not neatly stacked one
on top of the other). This can cause envelopes to stack out of
printed sequence.
Exit Slide Rollers (in
jam-clearing position)
Exit Roller
Release Lever
Summary of Contents for AddressRight DA70S
