Pitney Bowes AddressRight DA70S Page 37 Operator'S Manual Download

Page: 37 / 74

3 • Printer Maintenance

3-2

SV61665 Rev. C

Preventive Maintenance

The Ink Jet Printer is designed for trouble-free service with a minimal

amount of care. You should schedule regular cleaning of the Feed

Rollers, Exit Rollers and Lower Guide.

CAUTION:

• Clean print head, cartridge, ink surfaces and

covers with plain water only. (Water works best!)

• Clean all rubber rollers with isopropyl, denatured

and rubbing alcohol only.

• Use of any other cleaning solvents will void all

warranties.

• Keep petroleum based cleaning solvents away

from rubber or plastic parts. Anything but alcohol

will cause premature breakdown of the rubber

compound.

Print Quality Problems

The print head performs a self cleaning cycle periodically. If print

quality is unacceptable, try the following:
• Adjust the media thickness lever to see if print quality improves.
• Clean the print head cartridge: dampen a soft cotton cloth with

water and wipe the nozzles clean.

Summary of Contents for AddressRight DA70S











































































Search results

Summary of Contents for AddressRight DA70S

Reviews:

Related manuals for AddressRight DA70S

Brands by name

Popular brands

Pitney Bowes AddressRight DA70S, Operator'S Manual

Search results

Summary of Contents for AddressRight DA70S

Reviews:

Related manuals for AddressRight DA70S

Brands by name

Popular brands