Pitney Bowes AddressRight DA70S, Operator'S Manual, Page: 30 / 74

Printer Basics • 2
2-13 SV61665 Rev. C
Printer Driver Software
Before you can use your printer with your computer, you must install
a printer driver. The driver gives your computer information about the
printer you're using, and tells the printer about the settings you want
to use in your print job.
If you have not previously installed the printer driver on your
computer, refer to the installation instructions furnished with it.
The printer drivers are contained on a CD that comes with your
printer. To set up, follow the instructions as shown in the installer.
Selecting Printer Properties
This section describes printer properties and use of the windows
for selecting the available options. To access the main properties
window, follow these steps:
1. Click the
Start button in the task bar, then select Settings.
2. Click Printers . The Printer window displays.
3. Right click the Pitney Bowes printer icon, then left click the
Properties option.
The Propertes window opens and displays seven tabs, each of
which allows access to different printer options. An explanation of the
items on each tab is available by doing the following:
• Right click an item to display the "What's This" button.
• Right or left click this button to display the information about the
selected item.
Optons may dffer dependng on whch software drvers are used.
9. Printing a Test Piece
Print a test piece to ensure the material is loaded properly.
(Or you can use a single test piece if you'd like to check your
setup adjustments.) Use the Control Panel keys to print a test
piece. Refer to Usng the Control Panel in this chapter for more
information.
Check the print quality. If it's not what you want, adjust the media
thickness lever as required and run another test piece. When
you're satisfied with the setup adjustments, you're ready to run
the job.