Pitney Bowes AddressRight DA70S, Operator'S Manual

Page: 9 / 74

1 • Introduction
1-2 SV61665 Rev. C
Welcome to the DA70S/DA75S Ink Jet Printer
The DA70S/DA75S ink jet printer is a desktop printer used to print
addresses, graphics and other information, in color (DA75S only),
on a wide range of material of various sizes, construction and
composition. You can define the font, placement, print quality and
barcode characteristics for your addresses.
Using This Guide
Refer to this guide for information about printer setup, operation and
troubleshooting. It is divided into the following chapters:
Chapter 1, Introduction - Contains an overview of the Operator
Guide, Help resources, safety information, as well as printer parts
and locations.
Chapter 2, Printer Basics - Explains how to set up your printer to
run a job.
Chapter 3, Printer Maintenance - Describes how to keep the printer
clean and functioning properly.
Chapter 4, Troubleshooting - Contains a list of possible problems
and their solutions.
Appendix A, Specifications -
Provides hardware and material
specifications. Your printer will run at its best when your material
conforms to our specifications.
Appendix B, Glossary - Explains the meanings of common terms
used with address printing equipment.
System Requirements
In order to operate the printer with your computer, your system must
meet the following requirements:
CPU: Pentium II 233 MHZ or greater, 64 MB or more preferred
Operating System: Windows 2000/2003 Server/XP
USB Cable or Ethernet Cable: A USB cable is supplied with your
printer. If you choose to use another cable, make sure it isn't any
longer than 16 feet (5m).