manualshive.com logo in svg

Pitney Bowes AddressRight DA70S, Operator'S Manual, Page: 36 / 74

Share
Download
Pitney Bowes AddressRight DA70S Operator'S Manual Download Page 36

3-1

SV61665 Rev. C

3 • Printer Maintenance

This chapter describes the maintenance procedures you 

should perform on a regular basis to keep your printer running 

trouble-free.

Preventive Maintenance .....................................................3-2
Print Quality Problems ........................................................3-2
Cleaning the Exit Rollers ....................................................3-3
Cleaning the Sensor ...........................................................3-3
Cleaning the Printhead Shaft..............................................3-3
Cleaning the Floor Assembly and Top Cover .....................3-4
Purging the Printhead .........................................................3-4
Installing and Removing the Ink Jet Cartridges ..................3-5

Installing the Ink Jet Cartridges (Color & Black) ..........3-5
Removing the Ink Jet Cartridges ..................................3-6

CMYK Printing Alignment (DA75S ONLY) ..........................3-8

Summary of Contents for AddressRight DA70S











































































Reviews:

No comments