Pitney Bowes AddressRight DA70S, Operator'S Manual

Page: 25 / 74

2 • Printer Basics
2-8 SV61665 Rev. C
4. Setting the Feed Ramp
A. Slide the ramp to the top of the input guide.
B. With the Feed Gap properly set for one piece of media, slide
the ramp down.
C. Add a stack of media and adjust the ramp downward until
the first piece of media is resting half way down the angle of
the ramp surface as pictured below.
NOTE: This picture is shown without the side guide, for ease
of illustration.