NOTES:
1. If you are polling several locations during one AutoDial Job, all remote fax units
to be polled during that job must have the same Passcodes or require no
Passcode at all. Each time a remote fax unit requires a different Passcode, press
NO during Step #8 and create a new AutoDial Job.
2. There is no universal polling standard. It may not be possible for your Model
9930 to poll certain non-Pitney Bowes machines.
5.3.3 Entering a Relay Programmable AutoDial Job
The Model 9930 allows you to set up a single-node relay AutoDial Job (through
one remote machine or group of remote machines — a "broadcast relay") to one
or several final destinations. Or you can relay a document via a dual-node relay
(first through one machine — or group of machines — then through another
machine or group of machines) to the final destinations. (NOTE: Remote
machines are referred to as relay stations).
70
Do This
5. Enter one of the following: a phone number from the
Numeric Keypad; a Speed Dial number(s); or a One
Touch Key.
To erase a mistake on the Numeric Keypad, press NO
to backspace.
6. Press YES after entering the number (If you entered a
Speed Dial number, press YES a second time).
7. If you’re polling several locations, press YES and enter
another number. (NOTE: 32 random phone
numbers can be entered from the 9930 Numeric
Keypad). Repeat Steps #5 through #7 until all numbers
are entered. Then press NO to continue
8. If the remote location requires a Passcode, enter the
correct four-digit Passcode, then press YES or you will
not be able to receive from the other unit. Press NO if
a Passcode is not required.
9. Enter the time to dial the remote station, and then
press YES. Or just press YES to begin polling now.
This Happens
The number appears in the
display
ANOTHER NUMBER?
ENTER PASSCODE
IF NEEDED _ _ _ _
ENTER TIME
_ _:_ _
JAN 15 1998 10:00
SYSTEM READY
Summary of Contents for 9930
Page 2: ...Operator s Guide Model 9930 ...
Page 19: ...3 2 Operator Control Panel 7 ...
